INSUBCONTINENT EXCLUSIVE:
than with just push or pull
radiatorNeal: There's always a dead zone
So, the problem is you have the center of the fan
There's always a dead zone there
They actually reversed part of the fan section that took the air and basically turned it another way and forced it to go in a single
Instead of exiting the tip blade and going out the side but you still had the hub in the center.Then you also had a company, back in the
day, who did tip magnetic drive that moved the motors into the corners, and so it had a very small hub in the center, which worked, but that
fan was then four times as expensive because it had four motors instead of one in the center.So, you get down to the point where you can get
the center section as small as possible, but there's a little bit of a dead zone
There's always going to be that dead zone coming off the fan motor into the radiator.
