INSUBCONTINENT EXCLUSIVE:
At MBC Biolabs, an incubator for biotech startups in San Francisco Dogpatch neighborhood, a team of scientists and interns working for the
small startup Prellis Biologics have just taken a big step on the path toward developing viable 3D-printed organs for humans.
The company,
which was founded in 2016 by research scientists Melanie Matheu and Noelle Mullin, staked its future (and a small $3 million investment) on
a new technology to manufacture capillaries, the one-cell-thick blood vessels that are the pathways which oxygen and nutrients move through
to nourish tissues in the body.
Without functioning capillary structures, it is impossible to make organs, according to Matheu
They&re the most vital piece of the puzzle in the quest to print viable hearts, livers, kidneys and lungs, she said.
&Microvasculature is
the fundamental architectural unit that supports advanced multicellular life and it therefore represents a crucial target for bottom-up
human tissue engineering and regenerative medicine,& said Jordan Miller, an assistant professor of bioengineering at Rice University and an
expert in 3D-printed implantable biomaterial structures, in a statement.
This real-time video shows tiny fluorescent particles & 5 microns
in diameter (the same size as a red blood cell) & moving through an array of 105 capillaries printed in parallel, inside a 700 micron
Each capillary is 250 microns long.
Now, Prellis has published findings indicating that it can manufacture those capillaries at a size and
speed that would deliver 3D-printed organs to the market within the next five years.
Prellis uses holographic printing technology that
creates three-dimensional layers deposited by a light-induced chemical reaction that happens in five milliseconds.
This feature, according
to the company, is critical for building tissues like kidneys or lungs
Prellis achieves this by combining a light-sensitive photo-initiator with traditional bioinksthat allows the cellular material to undergo a
reaction when blasted with infrared light, which catalyzes the polymerization of the bioink.
Prellis didn&t invent holographic printing
Several researchers are looking to apply this new approach to 3D printing across a number of industries, but the company is applying the
technology to biofabrication in a way that seems promising.
Holography-based 3D printing produces objects in seconds instead of hours
The
speed is important because it means that cell death doesn&t occur and the tissue being printed remains viable, while the ability to print
within structures means that Prellis& technology can generate the internal scaffolding to support and sustain the organic material that
surrounds it, according to the company.
The video above, courtesy of Prellis Biologics, shows real-time printing of a cell encapsulation
device that is useful for producing small human cells containing organoids
The structure is designed to be permeable and the size is 200 microns in diameter and can contain up to 2000 cells.
Prellis isn&t the first
company to develop three-dimensional organ printing
There have been decades of research into the technology, and companies like BioBots (which made its debut on the TechCrunch stage) are
already driving down the cost of printing living tissue.
Now called Allevi, the company formerly known as BioBots has seen its founders part
ways and its business strategy shift (it now focusing on developing software to make its bioprinters easier to use), according to a report
Allevi has slashed the cost of bioprinting with devices that sell for less than $10,000, but Prellis contends that the limitations of
extrusion printing mean that technology is too low resolution and too slow to create capillaries and keep cells alive.
Prellis& organs will
also need to be placed in a bioreactor to sustain them before they&re transplanted into an animal, but the difference is that the company
aims to produce complete organs rather than sample tissue or a small cell sample, according to a statement
The bioreactors can simulate the biomechanical pressures that ensure an organ functions properly, Matheu said.
&Vasculature is a key feature
of complex tissues and is essential for engineering tissue with therapeutic value,& said Todd Huffman, the chief executive officer of 3Scan,
an advanced digital tissue imaging and data analysis company (and a Prellis advisor)
&Prellis& advancement represents a key milestone in the quest to engineer organs.&
Matheu estimates that it will take two-and-a-half years
and $15 million to bring implantable organs through their first animal trials
&That will get a test kidney into an animal,& she said.
The goal is to print a quarter-sized kidney that could be transplanted into rats
&We want something that would be able to handle a kidney that we would transplant into a human,& Matheu said.
One frame of a 3D map of
animal tissue from 3Scan .
Earlier this year, researchers at the University of Manchester
href="https://newatlas.com/working-kidney-cells-grown-mice/53354/"> grew functional human kidney tissue from stem cells for the first time
The scientists implanted small clusters of capillaries that filter waste products from the blood that had been grown in a Petri dish into
genetically engineered mice
After 12 weeks, the capillaries had grown nephrons — the elements that make up a functional human kidney.
Ultimately, the vision is to
export cells from patients by taking a skin graft or blood, stem cell or bone marrow harvest — and then use those samples to create the
cellular material that will grow organs
&Tissue rejection was the first thing I was thinking about in how I was designing the process and how we could do it,& says Matheu.
While
Prellis is spending its time working to perfect a technique for printing kidneys, the company is looking for partners to take its
manufacturing technology and work on processes to develop other organs.
&We&ll be doing collaborative work with other groups,& Matheu said
&Our technology will come to market in many other ways prior to the full kidney.&
Last year, the company outlined a go-to-market strategy
that included developing lab-grown tissues to produce antibodies for therapeutics and drug development
The company first targeted human tissue printed for clinical development were cells called &islets of Langerhans,& which are the units
within a pancreas that produce insulin.
&Type 1 diabetics lose insulin-producing islets of Langerhans at a young age
If we can replace these, we can offer diabetes patients a life free of daily insulin shots and glucose monitoring,& said Matheu in a
statement at the time.
Matheu sees the technology she and her co-founder developed as much about a fundamental shift in manufacturing
biomaterials as a novel process to print kidneys, specifically.
&Imagine if you want to build a tumor for testing… In the lab it would
take you five hours to print one… With our system it would take you three and a half seconds,& said Matheu
&That is our baseline optical system… The speed is such a shift in how you can build cells and fundamental structures we are going to be
working to license this out.&
Meanwhile, the need for some solution to the shortage in organ donations keeps growing
Matheu said that one in seven adults in the U.S
have some sort of kidney ailment, and she estimates that 90 million people will need a kidney at some point in their lives.
Roughly 330
people die every day from organ failure, and if there were a fast way to manufacture those organs, there no reason for those fatalities,
Prellis estimates that because of the need for human tissue and organ replacement alternatives, as well as human tissue for drug discovery
and toxicology testing, the global tissue engineering market will reach $94 billion by 2024, up from $23 billion in 2015.
&We need to help
people faster,& says Matheu.
